Page 72 of 97
9 – STANDARD OPERATOR
MAINTENANCE
______________________________________________________________________________________________
Cleaning
• Nothing has to fall inside the battery.
• Clean only with water, then dry.
• Protect cables with anti-rust products.
Storing
• Completely charge the battery before storing.
• Store batteries in a cool, dry location.
• Avoid direct exposure to heat sources such as radiators or heaters
• While storing, charge batteries every six weeks.
9.4 General warnings for maintenance activity
The machine must be parked on a level surface.
Perform maintenance when the machine is cold.
Rest the machine on some blocks, it cannot be kept lifted.
Rest all disassembled components on solid surfaces and places them so that they cannot
fall in case hydraulic pressure should fall.
All lifting devices must comply with the rules in force.
If possible, do not climb on the machine but use suitable lifting platforms.
Wear individual protective clothing (D.P.I.) such as gloves, glasses, etc.).
Do not wear jewels or things that can be lost while working
Pay attention not to damage hydraulic pipes or electrical cables during maintenance
operation;
Use suitable tools only.
9.5 Extraordinary maintenance
Extraordinary maintenance shall be carried out by authorized
workshops only.
The following timetable shows the maintenance operation schedule. Extraordinary maintenance
shall be carried out every 500 and 1000 working hours. The operator shall apply the machine
servicing before time is elapsing, otherwise the warranty will become void.
To Next Page
Loading...
Need help?
General
