Page 86 of 97
12 – TOOLS
______________________________________________________________________________________________
12.3 PETROL FEEDING KIT FOR SPD360C+
PETROL FEEDING KIT
PPB 6.6KW
Introduction: the petrol feeding kit PPB 6.6KW is positioned on the front of the machine
SPD360C+ and give you the possibility to operate the crane once the machine is stabilized and to
move the track.
Use:
¾ Start the engine manually ( for more information see engine manual)
¾ Accelerate the motor to max
¾ Turn the pump valve selector to track or crane position in accordance to wath you have to
operate
¾ To stop the engine, press the red emergency mushroom push button or turn the key
switch on the 0 position
To Next Page
Loading...
Need help?
General
