Page 5 of 97
1-PREFACE
______________________________________________________________________________________________
1 PREFACE
1.1 General Information
Each machine is equipped with a copy of this manual.
This instruction manual is intended to facilitate users and maintenance technicians to carry out all
of the operations necessary to operate the machine under safety conditions.
Only fundamental operations have been described. After practicing with the machine, the user will
be able to develop further technical skills.
Note: This manual is an integral part of the machine and must therefore accompany
the machine should this be sold, passed on or moved to another place.
A proper training at the moment of delivering must complete the instructions described in this
manual.
As regards the accessories, please read their own instruction and maintenance manual.
Keeping the Manual
The Manual shall always be kept with the machine, even in case of sale.
In case of resell of the machine, the manual must follow it in its present conditions, even in case of
integrations and modifications sent by the manufacturer.The Manual will always be kept with the
machine until its last demolition: for this reason, it must be kept with care in a safe place.
In case this manual was lost or subject to wear, please order another copy from the manufacturer
Ownership information
This manual contains proprietary information. All rights are reserved.
No part of this manual may be reproduced or photocopied without prior written consent of ORMET
SPA. Only customers to whom the manual has been supplied together with the machine are
allowed to use it to carry out use and maintenance operations on the machine it refers to.
This manual deals with all normal operations to be performed by the machine and with the main
regular maintenance operations required. The instruction herewith provided must be carefully
observed in order to properly use the machine. Machine operator training is required to operate the
machine. Take care not to perform operations and maintenance not recommended in this manual.
Make sure that only suitably qualified and authorized personnel carries out servicing when
dismantlement of some parts of the machine is required.
The manufacturer does not undertake any responsibility whatsoever for any direct or indirect
damage to objects or pets arising from the use of this manual or the machine in other conditions
than those stated herein. ORMET SPA reserves the right to modify or improve this manual and the
machines without notice, even those sold under the same model this manual refers to, but having
different serial numbers.
ORMET SPA reserves the right to change data equipment without prior notice as well as
instructions for maintenance and other measures. The measurements, weights and performance
etc. given in this manual are approximate and can vary depending on the equipment.
The CE marking approves the conformity by the machinery guideline 2006/42/CE.
To Next Page
Loading...
Need help?
General
