JEKKO SPD265C+ - Events that Relieve the Manufacturer from Its Liability; Maintenance and Servicing Register

Page 75 of 97
10 – SERVICING FORMS
______________________________________________________________________________________________
10.2 Events that relieve the manufacturer from its liability
THE MANUFACTURER SHALL BE RELIEVED FROM ANY RESPONSIBILITY OR LIABILITY IN
CASE OF:
o Improper use of the machine
o Tampering with the machine or with its component parts
o Machine used by not authorized personnel
o Serious maintenance shortage
o Partial or complete non-observance of instructions
o Non-topping up of lubrication system in the periodical checks and non-filling in of relevant
reports
o Non-performance of periodical checks
o Use of non original spare parts (spare parts not recommended by the manufacturer)
o Non authorized modifications and repairs
o Exceptional events.
10.3 Maintenance and servicing register
The following forms have been prepared in order to facilitate the operator to record and prove the
maintenance and servicing carried out on the machine.
Filling in the forms regularly is strongly recommended.