37
SPX532 – QUICKSTART GUIDE
17.2. WARNING PAGE
In the Warning page, the warnings are listed
with a brief description that helps to understand
the possible causes.
IMPORTANT:
The warning code is displayed only while the
operator is trying to operate the not-allowed
function!
For this reason, to read the warning code and
its description, you must hold the joystick or
the function until the code is displayed.
DEFINITION:
A warning blocks only one or more specific
functions that are not allowed for some reason
related to the machine configuration or to the context: a warning cannot be cleaned like the alarms!
(example: A2B rope fully in limit-switch is activated Warning code ID:1 FMI:0 SPN:2
Description: Block by fully winded rope (A2B)
Effect: Winch up function and telescopic out functions are locked )
NOTE: The warning page has got the red symbol!
To Next Page
Loading...
