23
SPX532 – QUICKSTART GUIDE
11. CRANE
Rotate the Working mode selector in position
and the Crane page will be displayed (see
picture beside).
IMPORTANT:
If the icons of the levers are not displayed on
bottom of the screen, the working mode needs
to be enabled!
11.1. ENABLE CRANE FUNCTIONS
To enable the crane functions press once the Start button on the remote control.
The conditions to enable crane functions are in the next page.
Once the functions are enabled, the Machine enabled icon (on top of
the screen) will become green and the icons of the levers will appear (on
the bottom of the screen).
MACHINE WORKING MODE ENABLED
MACHINE WORKING MODE NOT ENABLED
NO ICONS = WORKING MODE
NOT ENABLED
To Next Page
Loading...
