Jennov P87HM User Manual

1. Please power on the camera and plug in a network cable, then run the software
“SearchTools” to search the camera IP address.
2. Modify the IP address, enable the DHCP to obtain a IP address automatically,
or you can modify the IP address manually.
3. The camera QR code is used for remote viewing via phone APP.
4. Right mouse click on the IP address and select watch device on top of IE.
Note:
1，The software and the camera must be on the same LAN.
2，You can add a camera with mobile app by scanning the camera's QRcode.
2
1
3
Batch Modify IP Method
4
Support : support@jennov.com
- 10 -

Jennov P87HM Specifications

General

Brand	Jennov
Model	P87HM
Category	Digital Camera
Language	English