Jennov P87HM User Manual

NOTE: Command 92 only applies to enable human tracking
Human Tracking Settings
1. First, use the PTZ function to adjust the camera screen to the area you want to
view.
2. Enter "92" in the preset and double click " Call" to enable the auto-tracking
function.
3. If set, when a human body is detected in the monitoring area, the camera will
automatically track and shoot the target. After the tracking is complete (when the
target is out of the detection range for 10 seconds), the camera will return to the
original set position.
4. Enter "94" in the preset and click "Call" to switch off the automatic tracking function.
2023-04-17 Wednesday 15 : 14 : 16
Camera
Support : support@jennov.com
- 19 -

Jennov P87HM Specifications

General

Brand	Jennov
Model	P87HM
Category	Digital Camera
Language	English