Support : support@jennov.com
- 07 -
Ethernet cable connection method
Note: Please change the device default password when you first view it for
the security of your device.
(The password must be a combination of letters and numbers, with at least 8
characters. It is not recommended to use special symbols, or else the device
may not be recognized and cannot be viewed).
Please keep your password safe. If you forget your password, you will need
to restore the device to factory settings and re-add it.
1. After changing the password, the device will reset automatically.
2. Wait for about 10 seconds for the device to reconnect.
To Next Page
Loading...
Need help?
General
