Jensen AWM960 User Manual

10
17. Intro Scan (INT)
Press and hold INT(17) for more than three seconds during disc play to play the first 10 seconds of
each track on the current disc. Press INT again to end the scan and play the selected track.
18. Repeat (RPT)
Press and hold RPT (18) for more than three seconds during disc play to continuously repeat the
selected track. Press and hold RPT again to stop repeating.
19. Random Shuffle (RDM)
Press and hold RDM (19) for more than three seconds during disc play to play all tracks on a CD in
random, shuffled order. Press and hold RDM again to stop random play.
DVD Operation
While the majority of DVD funtions are controlled by the included remote control, the following DVD
functions may also be accessed using buttons on the radio’s front panel. Please see the following
page for a comprehensive overview of DVD operation using the remote control.
20. Stop
Press STOP (20) to suspend disc play, and “STOP” will appear in the display. Press the play/pause button
(15) to resume disc play.
21. Menu
Press MENU (21) to return to the root menu while in DVD mode.
22. Enter
While in menu mode, press ENTER (22) to select a menu option.
23. Language
While playing a DVD, press LANG (23) to select the audio language.

Jensen AWM960 Specifications

Power

power supply requirements	DC 12 Volts, Negative Ground
operating voltage	11-16VDC
total system power	75 Watts Maximum

FM Tuner

tuning range	87.5-107.9FM
sensitivity	<2.5uV
stereo separation at 1 kHz	>30dB

AM Tuner

tuning range	530-1710
sensitivity	<15uV

Amplifier

output power	75 Watts Total (25 Watts per Channel)
output wiring	2/6 Speaker and Headphone System
output impedance	Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum

DVD

frequency response	20-20, 000 Hz
channel separation	50dB
s/n ratio	70dB

Weight and Dimensions

overall dimensions	265mm(W)x178mm(H)x159mm(D)
mounting dimensions	235mm(W)x154mm(H)x133mm(D)
weight	3.75 lbs.(1.7 Kg)