VM9314
Fast FOlWard Playback
Press the
..
button (14) on the remote control or the
..
button on the screen
to fast forward. Keep pressing and releasing the button to increase the rate
from ''x2'' to ''x4'', ''x8'', and "x20".
Press
"'/I
(18) on the remote control or touch the on-screen play button (
..
) to
resume normal play.
Repeat Playback
Press the RPT button (7) on the remote control or the 0 button on screen to
alter repeat mode according to the following:
• DVD: Repeat Chapter, Repeat Title, Repeat Off
•
VCD
(PSC Off): Repeat Single, Repeat Off
NOTE:
For
VCD
play, the repeat function
is
not
available
if
PBC
is
on.
Sectional Repeat Function (A-B)
Use the A-B function to define a specific area
of
a disc to repeat.
• Press the
A-B button on screen to set the start point (A)
of
the repeated
section.
• Press the
A-B button again once you reach the desired end point (B)
of
the repeated section. The selected portion of the DVD will now repeat
continuously.
• Press the
A-B button again to cancel the A-B section setting and stop
repeat play.
Accessing
the
DVD
Menu
Press the MENU button (1) on the remote control to recall the main DVD
menu. Use the directional (arrow) buttons on the remote control to select a title
from the menu
or
touch the title on screen.
Press the TITLE button (2) on the remote control or on screen to select a
different title for playback.
Press the
"'II
button (18) on the remote control or press the rotary encoder (1)
to confirm your selection and begin playback.
You
can also select a title using
the touch screen.
Moving
Through
Chapters
Press the
"I
button (19) on the remote control or the
"I
button on screen to
advance to the next chapter on the DVD.
35
To Next Page
Loading...
