1. Touch the MENU on the front panel to access the source menu.
2.
Touch the BT icon on the source menu and the BT user interface
screen will appear.
3.
Touch the Options icon and the following screen will appear:
4. On the Options submenu set the BT function to ON.
5. On the Options submenu set the Auto Connect function to ON.
6.
Set the mobile phone BT discover mode to ON.
Note: Some discovery modes have a time limit, usually a minute, before
they are automatically turned OFF.
7. Touch the “Scan” icon on the unit’s BT user interface screen. Available
devices will appear with the “Pair” icon next to it.
The user can make or receive phone calls with BT enabled phones through the
unit. The user can also listen to music from a BT enabled device.
Pairing BT Devices
To connect your BT phone to the unit, the user needs to pair the phone to the unit.
Pairing only needs to be done once per phone. The user can pair up to five (5)
phones. Use your mobile phone to begin the BT pairing process.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
