FRAME
(A)
STEERING ROD (E)
HOOK
TURNING CONNECTOR
STEERING ROD COLUMN
2. TURN THE FRAME (A) ONTO ONE SIDE.
3. INSERT THE STRAIGHT END OF THE STEERING ROD
(E) THROUGH THE STEERING ROD COLUMN ON THE
UNDERSIDE OF THE FRAME, GUIDING THE HOOK INTO THE
HOLE OF THE TURNING CONNECTOR.
IMPORTANT: HOLD THE STEERING ROD IN POSITION
WHILE MANEUVERING THE FRAME AND CONDUCTING
THE REST OF THE STEERING SYSTEM ASSEMBLY STEPS TO
ENSURE THAT THE HOOK REMAINS IN THE HOLE OF THE
TURNING CONNECTOR.
To Next Page
Loading...
