4. ENSURE THAT THE TIP OF THE STEERING ROD EMERGES THROUGH THE TOP OF THE FRONT AXLE ON THE TOP SIDE OF THE
FRAME. CAREFULLY FLIP THE FRAME RIGHT SIDE UP WITHOUT DISTURBING THE STEERING ROD POSITION.
5. HOLD THE STEERING ROD (E) IN PLACE WHILE YOU CONNECT THE WIRES IN THE STEERING WHEEL (F) TO THE WIRES IN THE
FRONT GUARD (C). TO DO SO, MATCH THE WIRES SETS OF THE SAME COLOR AND CLICK THE INSERTION COUPLER OF EACH
WIRE SET INTO THE RECEIVING COUPLER.
IMPORTANT: CONNECT THE WIRE SETS OF MATCHING COLOR.
IMPORTANT: HANDLE ELECTRICAL COMPONENTS WITH CAUTION.
STEERING ROD (E)
STEERING WHEEL (F)
COUPLERS
4
5
To Next Page
Loading...
