JGR RL1 - Device Information and Settings

RL1 User Manual
12
M-RL1-001-01
Table 5: Detailed description of the RL1 Detectors page (see Figure 6)
Item #
Description
1
Battery charge indicator
2
RD-S serial number
3
Press and move up/down to scroll through the paired detectors list
4
Tap to pair a detector
5
Tap to unpair
6
Wired detector
7
Wireless detector
8
Put the RL1 into sleep mode
Device Information and Settings
Swipe right to access the Setup page (Figure 7). This page will display information about the unit, its
connectivity status and test settings. See Table 6 for a detailed description.
Figure 7: RL1 Setup page