Do you have a question about the Jinan USR IOT Technology USR-TCP232-410S and is the answer not in the manual?
Model | USR-TCP232-410S |
---|---|
Category | Server |
Product Type | Serial Device Server |
Serial Interface | RS232/RS485/RS422 |
Ethernet Interface | 10/100Mbps |
Protocols | TCP, UDP, HTTP |
Operating Temperature | -40°C to 70°C |
Humidity | 5% to 95% |
Basic Function | Bi-directional transparent transmission between RS232/RS485/RS422 and Ethernet |
Describes the necessary hardware setup for testing the device.
Details the steps for testing data transmission after hardware connection.
Explains how to configure and use the device in TCP Client mode.
Provides a step-by-step guide for testing the TCP Client mode.
Illustrates the configuration of the device for TCP Client mode using software.
Details how to configure and operate the device in TCP Server mode.
Explains the configuration and testing for UDP Client mode.
Shows a screenshot for testing the UDP Client mode.
Describes how to configure and test the UDP Server mode.
Explains how to transmit data to an HTTP server using the device.
Illustrates the webpage configuration for HTTPD Client mode.
Details the use of USR-VCOM software for virtual COM port functionality.
Shows the process of adding a COM port in the USR-VCOM software.
Demonstrates establishing a connection using the USR-VCOM software.
Enables interaction between a webpage and the serial port.
Shows the webpage interface for the Web to Serial function.
Illustrates sending and receiving data for the Web to Serial function.
Details the testing procedure for the Web to Serial functionality.
Guides on configuring the device for Modbus RTU to Modbus TCP conversion.
Shows the software interface for Modbus TCP configuration.
Outlines the process for upgrading the device's firmware.
Explains the RFC2217 feature for dynamic serial parameter adjustment.
Details the RFC2217 protocol and example configurations.
Describes how to use the Web to Serial feature.