JIYI K++ User Manual

2). Execution
After the runaway protection function is enabled, the flight
controller will perform the set runaway protection behavior after
the remote control signal is interrupted.
5. Out of control resume operation function
K ++ supports the function of setting out of control to continue the
operation so that the aircraft will continue to work after the remote
control is out of control.
1) .Setting
Before executing this function, you need to turn on the "Basic"->
"Remote Controller" in the Assistant Software to run out of control
to continue the route operation.

JIYI K++ Specifications

General

Brand	JIYI
Model	K++
Category	Controller
Language	English