2). Execution
When the out-of-control continue operation option is enabled, the
out-of-control protection will not be performed after the remote
control is out of control in the operation mode (AB operation, route
operation), but the operation task will continue to be performed. It
is recommended to use this function with the radar.
6. Low voltage protection function
K ++ supports setting low voltage protection function.
1) .Setting
Before executing this function, you need to enable the runaway
protection in the "Advanced"-> "Protection Function" in the
Assistant Software. K ++ flight controller detects the battery
voltage through the power module and provides low voltage
protection. The flight controller provides six low-voltage protection
behaviors: none, pump off, pump off + return, pump off + hover,
pump off + landing after hovering, and pump off + landing. The user
can make setting selections as needed.
To Next Page
Loading...
Need help?
General
