EasyManua.ls Logo

JLG 4017PS - Fall Hazard

JLG 4017PS
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 1 - General Safety Practices
1-8 31200345
Fall Hazard
During operation, occupants in the platform must wear a full body harness with a
lanyard attached to an authorized lanyard anchorage point.
Before operating the machine, make sure all gates are closed and fastened in their
proper position.
Keep both feet firmly positioned on the platform floor at all times. Never use ladders,
boxes, steps, planks or similar items on platform to provide additional reach.
Never use the boom assembly to enter or leave the platform.
Use extreme caution when entering or leaving platform. Be sure that the boom is fully
lowered. Face the machine, maintain three point contact with the machine, using two
hands and one foot or two feet and one hand during entry and exit.
Avoid accumulation of debris on platform floor. Keep mud, oil, grease and other
slippery substances from footwear and platform deck.
OZ1290
O
Z1300

Table of Contents

Other manuals for JLG 4017PS

Related product manuals