Section 6 - Emergency Procedures
6-131200345
SECTION 6 - EMERGENCY PROCEDURES
6.1 EMERGENCY OPERATION
Operator Unable to Control Machine
If the platform operator is pinned, trapped or unable to operate or control machine:
1. Other personnel should operate the machine from cab controls only as required.
2. Other qualified personnel on the platform may use the platform controls. Do not
continue operation if controls do not function properly.
Platform or Boom Caught Overhead
If the platform or boom becomes jammed or snagged in overhead structures or
equipment, rescue platform occupants prior to freeing the machine.
To Next Page
Loading...
