Section 7 - Lubrication and Maintenance
7-531200345
4014PS
4017PS S/N 1160006867 & After
1. Check fuel gauge (1) located on instrument panel in cab.
2. If fuel is low, proceed to fuel source and perform “Shut-Down Procedure” on page 4-3.
3. Turn fuel tank cap (2) to remove from filler neck.
4. Add diesel fuel as needed.
5. Replace fuel tank cap.
Note: Replenish diesel fuel at end of each work shift to minimize condensation.
NOTICE
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during operation. See
Engine Operation & Maintenance Manual for details prior to servicing.
To Next Page
Loading...
