EasyManuals Logo

JLL S400 User Manual

JLL S400
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
Set up options
I
nsert the safety key into the
corresponding socket.
1. Without anyone on the treadmill,
plug the power cable.
2. Switch on the treadmill. Power
switch is under the front end of
the machine. The control panel will
light up and all the gures in the
window will go to ZERO.
3. Introduce the weight that you can
see ashing on the right side of the
screen using the SPEED button.
4. Press the START button and the
motor will work at the speed
of 0.3 km/h.
5. Press the FAST and SLOW
button to increase or decrease the
speed.
6. Press the UP and DOWN button to
increase or decrease the incline.
7. Press the STOP button to stop the
machine.
8. Put the music with MP3
format into a USB ash drive
and insert it into the USB
socket. On the treadmill press PLAY/
PAUSE to play the music. Change
the track with SOUND-/LAST
and SOUND+/NEXT buttons. For
adjusting the volume, press and
hold SOUND-/LAST or SOUND+/
NEXT buttons.
Use the following
instructions to
set up the units settings
Time display range 0:00 - 99:59
Distance range
0 - 9.999 km.
Total distance memory
Pulse display range 50 - 230 ppm
Calorie display range 0 - 999 Kcal
Maximum user weight 120 kg, 18.8 St or 264 lb.
Programmes 15 automatic programmes
Incline range 20 levels (= 12%)
Speed range
0.3 - 16 km/h
(0.18 - 10 mph)
Speed direct choice 5 and 8 km/h
Speaker High-delity stereo speaker
Music
MP3, USB audio interface and
Bluetooth connection
Fold/Unfold the treadmill
Fold: Before fold the treadmill. Remove the
secure locks place on both sides of the running
deck. Hold the end of the running deck, by the
side frames/rails, and lift it until the machine gets
an upright position and you hear a click from the
security lock clasp.
Unfold: Press the security lock clasp with your
foot. Push the running deck down, holding it by the
side frames. The running deck will go down slowly
thanks to the hydraulic system. Fasten the secure
locks place on both sides of the running deck.
www.jlltness.co.uk www.jllelectronics.co.uk
Stand on the side frames.
Do not stand on running belt.
When starting unit.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JLL S400 and is the answer not in the manual?

JLL S400 Specifications

General IconGeneral
BrandJLL
ModelS400
CategoryTreadmill
LanguageEnglish

Related product manuals