JLL S400 - Assembly; Site Preparation and Parts

Assembly
7
www.jlltness.co.uk www.jllelectronics.co.uk
Console
Safety key
Fast / Slow speed button
Heart sensor
Handrail
Motor cover
Running Belt
Side frames/rails
Rear adjuster
Pad adjuster
Up-down leg
Vertical frame
Diagram
Item
holder
Transport wheels
Preparing Site
Before assembling, verify the choosing site meets
the following criteria:
• Area is well illuminate and well ventilated
• Surfaced is levelled.
• Free area for access to unit and emergency
dismount. If it is possible keep the following
clearances: 0.5 m at each side and 2.0 m at
the back.
• Place the treadmill in a normal environment
with a relative humidity range of 30-75%. DO
NOT place close to steam room, sauna, indoor
pool or outdoor.
Rubber shock
absorption
Incline button
Pad adjuster
Secure lock