Johannus One - Before You Start to Play; Connecting Power Adapters and Pedals

16
Before You Start to Play
6
Connecting the AC Adaptor
1. Rotate the [VOLUME] knob toward the left position to
minimize the volume.
5 VOLTBALANCE
POWER PORT
VOLUME
MAN IIMAN I
PEDAL
2. Connect the included power cord to the AC adapter.
The indicator will light once you plug the AC adaptor into a wall
outlet.
Power cord
AC Adapter
To an AC outlet
NOTE
Depending on your area, the included power cord may dier
from the one shown above.
NOTE
Be sure to use only the AC adaptor (DEXIBELL DYS602-240250W)
supplied with the unit. Also, make sure the line voltage at the
installation matches the input voltage specied on the AC
adapter body. Other AC adapters may use a dierent polarity, or
be designed for a dierent voltage, so their use could result in
damage, malfunction, or electric shock.
NOTE
If you won’t be using the ONE for an extended period of time,
disconnect the power cord from the electrical outlet.
NOTE
To avoid malfunctions, never disconnect the AC/DC adapter
while the instrument is turned on.
3. Connect the AC adaptor to the ONE’s DC IN jack
positioned to the rear bottom panel.
OUTPUTDC IN PEDAL MIDI
L/MONOUSE DEXIBELL
ADAPTOR ONLY
R CRESCENDO DAMPER EXPRESSION THRU OUT IN
DYS602-240250W
24 Vdc
Connecting the Pedals
OUTPUTDC IN PEDAL MIDI
L/MONOUSE DEXIBELL
ADAPTOR ONLY
R CRESCENDO DAMPER EXPRESSION THRU OUT IN
DYS602-240250W
24 Vdc
REAR SIDE
Expression Pedal
Damper Pedal
Expression Pedal
1. Connect an expression pedal to the CRESCENDO socket.
The crescendo pedal incrementally activates stops as it is pressed
forward and removes stops as it is depressed backward.
MEMO
This socket can be use to connect a continuous Damper pedal
also. To set the pedal as damper please see "CRESCENDO PEDAL"
(p. 45).
2. Connect a damper switch to the DAMPER PEDAL socket.
This pedal is useful to control the sustain while playing piano
section. You will be able to hold the notes of the PEDAL, MANUAL
I orchestral sections. The sections can be assignable. See "Damper
Pedal Settings" (p. 43).
NOTE
The DAMPER socket accepts foot-switch ON/OFF type only.
3. Connect an expression pedal to the EXPRESSION PEDAL
socket.
You can control the volume of the Organ, Orchestra and Piano
sections.
The EXPRESSION socket is assignable in a way that various functions
can be assigned to it. See "Expression Pedal Settings" (p. 43).
Listening Through Headphones
You can use headphones to enjoy the ONE without disturbing
those around you.
1. Here you can connect stereo headphones. The ONE has
two headphones jacks . Two people can use headphones
simultaneously.