Johannus One - Working with Memory Pistons; Saving Settings and Exporting to USB; Recalling Settings and Cancelling Memory

33
Working with Memory Pistons
12
The ONE provides Memory Pistons that allow you to store almost all
settings (or registrations) you make on the front panel. You can save your
settings in 12 memories (4 memories x 3 banks).
Additional registrations can be stored or loaded directly from an external
USB Memory.
MEMO
You can recall the single registration via MIDI. See "Recalling
Memories via MIDI" (p. 38).
Saving Your Settings in a Memory
1. Set the tilt tabs, buttons and other functions so that you
hear the combination of sounds you want to store.
2. Press [M1, M2 or M3] piston to select the memory bank
you want to save.
USB
The piston you selected lights.
3. Hold down the [1,2,3,4] piston that corresponds to the
memory where you wish to save your settings.
USB
The memory piston you selected ashes and then lights steady to
indicate that the registration was saved.
NOTE
The settings previously saved in this memory will be overwritten
by your new registration.
Recalling Your Settings
1. If necessary, press the [M1, M2 or M3] piston to select the
bank that contains the settings you need.
2. Press [1]~[4] piston to load the registration of the
corresponding memory.
Cancel Function
This function is useful to quickly switch o all tilt tabs and orchestral
sounds.
1. Press the [0] piston.
USB
All tilt tabs and orchestral button switch o.
Exporting a Registration Set to an USB
Memory
This procedure lets you export the 12 registrations in a le into USB
Memory. This function may be useful as a backup of your work.
You can save up to 12 registration set (12 les) into a USB Memory.
1. Insert an USB Memory to save your data. See "Connecting
an USB Memory (commercially available)" (p. 18).
2. Press and hold the [FUNCTION/EXIT] button.
PRESETFINE
466
444
442
440
432
415
392
EQUAL
PYTHAGOREAN
MEANTONE
YOUNG II
KIRNBERGER III
VALLOTTI
WERCKMEISTER III
SCALE
TRANSPOSE
6
4
2
0
-2
-4
-6
5
3
1
-1
-3
-5
ENHANCER
CHORD
STRINGS
PIANO HARPSICHORD
CHOIR
BOURDON 8
GEDACT 8
BOURDON 8
HOHLFLÖTE 8
VIOLA DI GAMBA 8
SALICIONAL 8
SALICIONAL 8
QUINTATÖN 8
VOX CELESTE 8
VOIX CELESTES II
VOIX CELESTES II
BLOCKFLÖTE 4
ROHRFLUTE 4
CHIMNEY FLUTE 4
FLÛTE OCTAVIANTE 4
QUINTE 2 2/3
NASARD 2 2/3
VIOLA 4
NAZARD 2 2/3
WALDFLÖTE 2
WALDFLUTE 2
BLOCK FLUTE 2
OCTAVIN 2
QUINTE 1 1/3
AMERICAN
ENGLISH
FRENCH
GERMAN
MANUAL I
TUNING TEMPERAMENT
SPLIT POINT
The [FUNCTION/EXIT] button ashes to indicate that we are in
function mode. All other indicators go dark.
3. Press the lower part of the "2" tilt tab to select the EXPORT
MEMORY function.
Now you have to choose in which "location" (le) of the USB
memory you want save.
You can save up to 12 registration set (les) in to USB Memory. Each
location is selectable through the [M1]~[M3] and [1]~[4] memory
pistons.
For example, if you want to save the set in the location 1.1, you have
to select [M1] and [1] memory piston. If you want to save in the
location 3.2, press the [M3] and [2] memory piston. The possible 12
location are [1~3].[1~4].
NOTE
When you save a registration set into USB memory, it will