EasyManuals Logo

Johannus One User Manual

Johannus One
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
Connecting External Audio Amplier
USB
2. Rotate the ONE’s [VOLUME] knob to adjust the volume of
the headphone.
Cautions when using headphones
To prevent damage to the cord’s internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
Your headphones may be damaged if the volume of a device is
already turned up when you plug them in. Minimize the volume
before you plug in the headphones.
Excessive input will not only damage your hearing, but may also
strain the headphones. Please enjoy music at a reasonable volume.
Connecting External Audio Amplier
You can connect the OUTPUT R L/MONO jacks to an external
amplier, mixing consoles, etc.
NOTE
If you want to use only one channel on your external amplier,
connect the L/MONO socket to its input. For optimum sound
quality, we recommend working in stereo, though.
1. Rotate the [VOLUME] knob toward the left position to
minimize the volume.
2. Connect the ONE’s OUTPUT jacks to the inputs of your
external audio device.
REAR SIDE
OUTPUTDC IN PEDAL MIDI
L/MONOUSE DEXIBELL
ADAPTOR ONLY
R CRESCENDO DAMPER EXPRESSION THRU OUT IN
DYS602-240250W
24 Vdc
Connecting Digital Player Devices
You can connect the INPUT jack to an audio playback device.
The audio of playback will be reproduced with the ONE's internal
speakers .
1. Rotate the [VOLUME] knob toward the left position to
minimize the volume.
2. Connect the ONE’s AUDIO IN jack to the output of an
external signal source.
USB
3. Use the AUDIO IN knob to adjust the input level the ONE’s
AUDIO IN jack to the output of the signal received.
Connecting the ONE to Your Computer
If you use an USB cable (commercially available) to connect the
COMPUTER port located on the ONE’s front panel to the USB port
of your computer, you’ll be able to transfer MIDI data between the
ONE and your sequencer software.
NOTE
The ONE does not support GM/GS standard.
What do you need to connect the ONE with your
computer?
USB cable (type A–male - type B–male: commercially available)
1. Use a standard USB cable (AgB-type connectors,
commercially available) to connect the ONE to your
computer as shown below.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Johannus One and is the answer not in the manual?

Johannus One Specifications

General IconGeneral
BrandJohannus
ModelOne
CategoryMusical Instrument
LanguageEnglish

Related product manuals