Table 12: CGM Controller accessories (order separately)
Product Code Number Description
ACC-TBKPWFCSA-0
Power, FC Bus, and SA Bus terminal block replacement kit for SNC, CGM, CVM, and
XPM products. Kit includes 5 of each terminal block type.
MS-FIT100-0
The Field Inspection Tool or (FIT) is a portable handheld device with a user
interface that is used to test and troubleshoot the BACnet protocol MS/TP RS-485
communications bus that connects supervisory controllers and equipment
controllers to field point interfaces.
The FIT can be used to check out the wiring of the MS/TP RS-485 bus as well
as verify proper communications of supervisory controllers and equipment
controllers connected to the bus. The FIT can be used on both the FC Bus and SA
Bus.
TL-BRTRP-0 Portable BACnet/IP to MS/TP Router
M4-CGM General Purpose Application Controller Installation Guide 21
To Next Page
Loading...
Need help?
General
