Firmware Version 3.5 Factory Field Installation
24-10025-199 Rev. –
5
Configuring the computer takes approx
imately 2 minutes and need only be
performed once.
IMPORTANT: Before changing the IP address settings of your computer, write
down the current settings (see Table 1: Computer Settings). This information
enables you to re-configure the computer with the original settings once you
have finished upgrading the CK721-A controller. Failure to revert to the original
settings may result in computer network issues or other problems related to the
configuration changes.
The following table provides a quick reference of the required computer
configuration changes:
CK721-A Factory Field File
To extract CK721-A Version 3.5 files from ISO:
1. Copy the ISO file CK721a_v3p5Build14_[date]_CD to the
computer
.
2. Extract the ISO image to the computer’s Download folder. WinZip
®
an
d 7-Zip are two examples of utilities to extract ISO images.
3. From the Download folder, navigate to the newly created
CK721a_v3p5Build14_[date]_CD folder and locate the
Server
Installation su
b-folder.
4. Copy the contents of Factory_Field_Installation sub-folder to C:\
directory.
5. Verify the following files were copied to C:
\.
C:
\FTP\ck721a
Table 1: Computer Settings
Computer Settings Current Settings Change to . . .
File and Printer Sharing for
Microsoft Networks
Enabled
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
To Next Page
Loading...
Need help?
General
