Wired Controller DWCR2
14
3.7.4 Absence Function Setting
After entering user function page, press “ “∧” or ∨” button to select holiday
function option and press “
＜
” or “
＞
” button to turn on or turn off this function with
auto saving.
This function is used to maintain indoor temperature so that the unit can realize
fast heating.
Note:
① This function is only available in heating mode;
② When this function is set, the set temperature is displayed as 46℉(8℃). In
this case, temperature setting and fan speed setting are shielded;
③ This function is canceled when switching modes;
④ This function and sleep function cannot be on simultaneously. If absence
function is set first and then the sleep function is set, the absence function is
canceled while the sleep function is valid, and vice versa.
3.7.5 Memory Function Setting
Enter the user function page, and press “∧” or “∨” button to select memory
function. Then, press “
＜
” or “
＞
” button to turn on or turn off memory function with
auto saving.
To Next Page
Loading...
Need help?
General
