Johnson Controls DWUNI User Manual

3.7.7 Save Function Setting
After entering user function page, press “
ġ
” or “
Ģ
” button to select save function
and press “
˘
” or “
˚
” button to turn on or turn off save function. Press MENU button to
enter save function setting page.
After entering save function setting page, press “
˘
” or “
˚
”
button to select
cooling or heating temperature limits. After selecting cooling or heating temperature
limits, press “
ġ
” or “
Ģ
” button to adjust temperature limits value. After setting, press
MENU button to save the setting.
Note: When save function has been set, auto mode cannot be set.
3.7.8 Auxiliary Heating Function Setting
After entering User Function page, press “
ġ
” or “
Ģ
” button to select Auxiliary
Heating function and press “
˘
” or “
˚
” button to turn on or turn off this function with
auto saving.
3.7.9 X-fan Function Setting
After entering User Function page, press “
ġ
” or “
Ģ
” button to select Dry function
option and press “
˘
” or “
˚
” button to turn on or turn off this function with auto saving.
Note:
This function is only available in cooling mode and dry mode.
When this function is on, if the air conditioner is turned off, the indoor fan
will still operate at low speed for a while to dry the residual water inside the
unit.
Ɣ
Ɣ
Wired Controller DWUNI User Manual
3.7.10 Quiet Function Setting
After entering user function page, press “
ġ
” or “
Ģ
” button to select Quiet function
and press “
˘
” or “
˚
” button to turn on or turn off this function with auto saving.
Note: This function is only available in cooling mode, heating mode and
auto mode.
3.7.11 Fahrenheit Temperature Setting
After entering user function page, press “∧” or “∨” button to select Fahrenheit
temperature function and press “＜” or “＞” button to turn on or turn off this function
with auto saving. After closing this function, Fahrenheit temperature is displayed.


Johnson Controls DWUNI Specifications

General

Brand	Johnson Controls
Model	DWUNI
Category	Controller
Language	English