QUANTUM™ HD COMPRESSOR CONTROL PANEL
COMMUNICATIONS SETUP
090.040-CS (JAN 14)
Page 35
ALLEN-BRADLEY PROGRAMMING OVERVIEW
This section contains programming examples for reading
data from, and writing data to the Frick® Quantum™ HD
control panel from an Allen Bradley (AB) SLC500 proces-
sor. AB RSLogix500 programming software has been used
for the following examples, however, these examples can
also be used for the AB RSLogix5 software.
CHANNEL CONFIGURATION
The following are representations of the channel con-
figuration screens from the AB RSLogix500 program-
ming software for the SLC500. Enter values as shown
in order to establish communications via AB Protocol.
General Configuration
To Next Page
Loading...
