Name: Johnson Controls IQ Lock-PowerG
Brand: Johnson Controls
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Installing the latch

Use the following steps to install the latch on the door.

Before you begin: Make sure the latch is in an unlocked position.

1. Hold the latch in front of the door hole, with the latch face flush against the door edge.

a. If the slotted hole is centered in the door hole, no adjustment is required. Proceed to the

next step.

b. If the slotted hole is not centered in the door hole, you need to make adjustments.

IQ Lock-PowerG Installation and User Guide D-30924014

Questions and Answers:

Need help?

Do you have a question about the Johnson Controls IQ Lock-PowerG and is the answer not in the manual?

Johnson Controls IQ Lock-PowerG Specifications

General