Enrolling the IQ Lock-PG with Auto Learn
Enrollment
You can enroll the IQ Lock-PG on the IQ Panel by using the Auto Learn Devices feature. To enroll
the IQ Lock-PG on the IQ Panel with the Auto Learn Devices feature, complete the following
steps:
Before you begin: Ensure the IQ Lock-PG is turned on.
1. From the IQ Panel menu, select Settings > Advanced Settings > Enter Installer
Code > Installation > Devices > Automation > Auto Learn Devices.
2. After you insert the batteries, ensure you set left or right door orientation to initiate the
device enrolment to the panel.
3. When a device is recognised, tap OK when the pop-up window appears. When the next
configuration pop-up window appears, confirm the sensor ID and the sensor type. The sensor
ID is the device ID on the product label.
4. Optional: For increased security during enrollment, enter the PIN code on the IQ Lock-PG
product label. If you enter an incorrect PIN code, the IQ Lock-PG does not pair with the panel.
5. Tap Pair.
6. If the lock does not automatically enroll, use a sharp pointed tool to press the reset button
twice quicky until the panel emits a beeping sound. This starts the auto-enroll process.
Result: The device enrolls successfully.
Enrolling the IQ Lock-PG manually with ADD
POWERG
You can manually enroll the IQ Lock-PG on the IQ Panel with the ADD POWERG feature. To enroll
the IQ Lock-PG on the IQ Panel manually with the ADD POWERG feature, complete the following
steps:
Before you begin: Ensure the IQ Lock-PG is turned on =.
1. On the IQ Panel menu, select Settings > Advanced Settings > Enter Installer
Code > Installation > Devices > Automation > Add POWERG.
2. Enter the sensor id in the Sensor ID field or scan the QR code on the box label to enroll it. The
sensor ID is the device ID on the product label.
3. When a device is recognised, tap OK when the pop-up window appears. When the next
configuration pop-up window appears, confirm the sensor ID and the sensor type.
4. Tap Pair.
5. Remove and reinsert the batteries.
Result: The device enrolls successfully.
21IQ Lock-PowerG Installation and User Guide D-309240
To Next Page
Loading...
Need help?
General