EasyManua.ls Logo

Jonsered FR2113A - Test Running

Jonsered FR2113A
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 English
8009-250
8009-252
6004-006H
8009-248
WARNING!
Petrol is highly flammable.
Observe caution and fill the tank
outdoors.
Test Running
Fill with petrol. The engine should be run on a
minimum of 85 octane unleaded petrol (not mixed
with oil). Environmentally-adapted alkylate petrol,
such as Aspen, can be used with advantage.
WARNING!
Never run the engine indoors, or
in enclosed or badly ventilated
areas. Engine exhaust fumes
contain poisonous carbon
monoxide.
Start the engine.
Check that the machine is in neutral and is standing
still on flat ground when the parking brake is re-
leased.
(Not FR 13, FR 2111).
Check that the parking brake works.
Check driving forwards (1) and in reverse (2).
Check that the starter does not work when one of
the hydrostatic transmission pedals is pressed
(hydrostatic machines) or the gear stick is not in
neutral (FR 13, FR 2111).
Check that the engine stops if the driver stands
from the seat when one of the hydrostatic transmis-
sion pedals is pressed (hydrostatic machines) or
the gear stick is not in neutral (FR 13, FR 2111).
Check that the starter does not work when the
cutting unit is in the lower position.
Delivery Procedures

Table of Contents

Related product manuals