English – 3
Good service
Jonsered’s products are sold all over the world and only in specialised retail trade with complete service.
This ensures that you as a customer receive only the best support and service. Before the machine is
delivered it undergoes inspection and is adjusted by your dealer.
When you need spare parts or support in questions about service, warranty issues, etc., please consult the
following professional:
This operator’s manual belongs to machine
with serial number:
INTRODUCTION
Serial number
The serial number can be found on the printed plate attached to the front, left-hand side under the seat.
Stated on the plate, from the top are:
• The machine’s type designation.
• The manufacturer’s type number.
• The machine’s serial number.
Please state the type designation and serial number when ordering spare parts.
The engine number is punched on a plate that is riveted to the fan cover. The plate states:
• Model.
• Type.
• Code.
Please state these when ordering spare parts.
The transmission’s serial number on hydrostat machines is stated on the barcode decal located on the front
of the housing on the left-hand drive shaft:
• Type designation is stated above the barcode and starts with the letter K.
• The serial number is stated above the barcode and has the prefix s/n.
• The manufacturer’s type number is stated under the barcode and has the prefix p/n.
Please state the type designation and serial number when ordering spare parts.
Engine Transmission
To Next Page
Loading...
Need help?
General
