Jonsered FR2113A - Engine

English – 17
8009-206
The table below includes the model numbers for the
different machines. These should be stated when
ordering manuals:
Machine type B & S model no.
FR 13 286707
FRM 13 A 286707
FR 2111 28B707
FR 2113 A 286707
FR 2113 MA 286707
FR 2115 MA 287707
It is important that only original spare parts are
used for repairing these engines. The use of other
parts invalidates the guarantee.
Design and Function
The FR 13 and FRM 13 A have single-cylinder,
side-valve engines developing 12.5 hp with splash
lubrication.
Engine
These Jonsered Riders have single-cylinder, air-
cooled engines from Briggs & Stratton.
Major engine repairs are not described in this
workshop manual. Such information can be found in
Briggs & Stratton’s own manuals, which include
detailed information about engine adjustments and
repairs. These manuals can be ordered from an
authorised workshop.
The transmission’s serial number is stated on the
barcode decal located on the front of the housing
on the left-hand drive shaft:
• The type designation is stated above the barcode
and starts with the letter ”K”.
• The serial number is stated above the barcode
and has the prefix ”s/n”.
• The manufacturer’s type number is stated under
the barcode and has the prefix ”p/n”.
Please state the type designation and serial
number when ordering spare parts.
6011-005