24 – English
5
6
7
8
6008-033
6012-091
8009-108
6012-003
Repair Instructions
Move the accelerator to the full choke position. Pull
the cable’s outer casing as far to the right as
possible and tighten the clamping screw. Pull back
the throttle to the full throttle position and check that
the choke is no longer activated.
Fit the exhaust pipe and tighten the fixing screws
and clamps.
Firmly fit the fuel hose to the fuel pump and attach
the hose clamp.
Attach the engine’s electrical connectors.
To Next Page
Loading...
