46 – English
22
8009-138
6017-155
Repair Instructions
Adjustment of FRM 13 A, FR 2113 MA
• Remove the front cover and the right-hand wing
cover.
• Loosen the nut (1) on the parallelism strut.
Remove the locking clip (2) and the parallelism
strut.
• Turn the fork counter-clockwise to lower the
cover’s rear edge, clockwise to raise the cover’s
rear edge.
• Secure the parallelism strut using the locking clip
and tighten the nut after adjustment.
• The parallelism of the cutting unit should be
checked again after the adjustment has been
made.
• Attach the front cover and the right-hand wing
cover.
Adjustment of FR 2115 MA
• Remove the front cover and the right-hand wing
cover.
• Loosen the nuts on the parallel strut.
• Screw the strut counter-clockwise to lower the
cover’s rear edge, clockwise to raise the cover’s
rear edge.
• Tighten the nuts after adjustment.
• The parallelism of the cutting unit should be
checked again after the adjustment has been
made.
• Attach the front cover and the right-hand wing
cover.
To Next Page
Loading...
