Page- 71 -
5. If the radio is not already set to TW,then select SAVE.
To activate or deactivateTW,do the following:
1. Press Scanto activate triple watch.
2. Press the up/down buttons to watch a thirdchannel.
3. Press Scana second time to deactivatedtriple watch.
12.9.3 Scan
Function: Display screen:
Scan
The scanfunctionallows the radio canscanup to 12 memory
channels (Channel16and theactive channel areautomatically
included).
The radio is supplied without any pre-programmedchannels, therefore,until
a channelis addedinto the memory youwillnot have a channel available to
scan.
In this case,when you press Scan you will automatically go directly to the
ScanProg screen.
Allstoredchannels canbe browsedby pressing the Mem button.Stored
channels are displayedwith anM.
To Next Page
Loading...
