J+J J4C S20 Handbook

HANDBOOK_56
 SELDIR
NC Set-Up
NC - If, in case of a power supply
failure, we need the actuator go to
the CLOSE posion, we need to put
the jumper 1 on the SELDIR
posion.
(*) NO or NC Set-Up
NO Set-Up
NO - If, in case of a power supply
failure, we need the actuator go to
the OPEN posion, be sure that
the jumper 1 is not on the SELDIR
posion.


J+J J4C S20 Specifications

General

Brand	J+J
Model	J4C S20
Category	Controller
Language	English