J+J J4C S20 - 05 Kit Dps J4 C 20;85

05 KIT DPS J4C 20/85
HANDBOOK_57
The DPS is a device for the J4C electric actuator
that turns the actuator into a servo controlled
valve posioner.
The DPS is a modulus with a microprocessor (CPU)
which digitally manages the analogical input and
output and compare them with the posion of the
actuator to establish a uniform relaon.
The analogical inputs are sent to the CPU where
they are processed for his connuous comparison
with the posion of the actuator, this allows to
obtain a very high sensivity next to a very high
repevity of the posion (see characteriscs).
The DPS in communicaon with the electronic
system of the actuator provides an integral mana-
gement of the moon of the actuator.
OUTSIDE BOX INSIDE BOX
SPECIFICATIONS

