JRC JCY-1950 - 8.9 NWP-69 Frame Grabber Unit Specs

Chapter 8 Specifications
131
8.9 NWP-69 Frame Grabber Unit
Performance
a) Image data input
1) Input channel 2 channels
2) Input interface Analog RGB / Hs / Vs
- RGB 0.7Vp-p (video signal)
- Hs TTL
- Vs TTL
3) Resolution 640 x 350 to 1600 x 1200 pixel (according to VESA
DMTS)
1920 x 1200 pixel (according to VESA CVT RB)
4) Refresh rate 60 to 85 Hz (according to VESA DMTS)
(Resolution 1600 x 1200 pixel, 1920 x 1200 pixel
60Hz only)
5) Recording interval 1 image every 15 seconds (each channel)
b) Communication port Connect to the RCU via ethernet
c) Compass safety distance
1) Standard 0.6m
2) Steering 0.3m
Environmental condition
a) Operating temperature: -15°C to +55°C (IEC60945 protected type)
b) Temperature and humidity: +40°C, 93% (without dew condensation)
c) Vibration: 2Hz to 13.2Hz ±1.0mm
13.2Hz to 100Hz 0.7G
d) Protection class IP22
General specification
a) Power voltage AC 100 to 120V ±10%, 1-phase 50/60Hz (IEC60945)
AC 200 to 240V ±10%, 1-phase 50/60Hz (IEC60945)
b) Power consumption 15VA
c) Size 255(w) x 248(d) x 72(h) mm
d) Mass 1.5kg
e) Color N2.5 semi-gloss