JRC JCY-1950 - Chapter 3: System Power Management; 3.1 Turning the System On

Chapter 3 Turn On and Off the System
11
Chapter 3 Turn On and Off the System
3.1 Turn On the System
1. Start the Recording Control Unit (RCU)
1) Unlock and open the front door.
2) Turn on the POWER switch.
3) After approximately 2 minutes, make sure that the MCB's LED (SYS., REC.) lights up in
green.
Figure 3-1 LED position of the MCB
SYS.
REC.
Expansion