Chapter 4 Operation Method
51
4. Conducts the self-diagnosis test of the microphone.
[Information]
The self-diagnosis test is function only for the microphone.
1) Tap the [Test] button in the AUDIO DATA CHECK screen. Then the self-diagnosis test starts.
2) After approximately 1 minute, the result of self-diagnosis test is displayed to the right side of
the [Test] button, and the indication of the [Status] field changes.
Table 4-20 Indication of self-diagnosis test
indication Color Description Result
Green
The self-diagnosis test
passed without problem.
Good
Yellow The self-diagnosis test failed. Fail
Gray
The self-diagnosis test is not
conducted.
---
5. Judge with the [Good] button and the [Fail] button from the result of Step 3 and Step 4.
If the [Good] button or the [Fail] button taps, returns to the AUDIO DATA LIST screen.
6. For all equipment in the list, conduct from Step 2 to Step 5.
4.6.5 Checking the recording time
1. Tap the [Medium] field in the DATA CHECK screen.
Figure 4-37 MEDIUM screen
MEDIUM screen
DATA CHECK screen
To Next Page
Loading...
