Chapter 4 Operation Method
82
4.10 Operations Using the Rotary Knob
Explains the on-screen operations by using the rotary knob.
If the touch panel breaks down and cannot be operated, uses the rotary knob.
1. Hold down the rotary knob for 5 seconds.
If the rotary knob is held down for 5 seconds, the function of rotary knob changes from the
“Dimmer mode” to the “Operation mode”. In the operation mode, the cursor is displayed on the
screen.
[Information]
In the “Operation mode”, the screen brightness cannot adjust by the rotary knob.
2. Move the cursor.
To move the cursor, turning the rotary knob to the left or right.
3. Select the button, then execute.
Move the cursor on the desired button, then press the rotary knob.
4. To return the touch panel operation, push the HOME button.
Figure 4-78 Display in the operation mode
Cursor
To Next Page
Loading...
