Chapter 2 Names and Functions
9
2.2 NCG-1950 Operation Panel Unit
Table 2-3 Name and function of each part of the OPU
No. Name Function
1) Touch panel Tapping the touch panel, can operate the S-VDR system.
- 7-inch wide Liquid Crystal Display
- Resolution: WVGA 800 x 480 pixel
2) Speaker Sounds a display tap sound and plays back the recorded
conversation.
3) Rotary knob The rotary knob can adjust the screen brightness.
Furthermore, when touch panel failed, the OPU operate with
the rotary knob.
[Information]
If the rotary knob is held down for 5 seconds, the function
changes into the rotary knob operation mode. In the rotary
knob operation mode, the OPU cannot operate with the
touch panel.
4) HOME button If you would like to return to HOME screen, push the HOME
button. Furthermore, in the rotary knob operation mode, if the
HOME button is pushed, the function changes into the touch
panel operation mode.
5) USB port If you would like to copy data from internal storage, plug a
FAT32 formatted USB flash drive in this port. This port is
covered with a cap.
Figure 2-3 Name of each part of the Operation Panel Unit (OPU)
1) Touch panel
2) Speaker
3) Rotary knob
4) HOME button
5) USB port
To Next Page
Loading...
