JRC JCY-1950 - 4.7 System Setup and Configuration; 5.1 EPIRB Transmission Status

Chapter 4 Operation Method
54
4.7 System Setup - [Setup] Button
In the SYSTEM SETUP screen, it's possible to change the S-VDR system settings and check the
S-VDR system information.
4.7.1 The SYSTEM SETUP screen
1. Tapping the [Setup] button, then the SYSTEM SETUP screen is displayed.
Table 4-23 Item in SYSTEM SETUP screen
Item Function
Dimmer Adjusting the screen brightness.
Volume Adjusting the volume of screen touch sound.
Replacement parts Checking the replacement parts and the OPU operating
hours.
System information Checking the software version.
Remote access Controlling the remote access permission
Change password Changing the password.
The factory default password is “0000”.
Figure 4-40 SYSTEM SETUP screen
HOME screen
SYSTEM SETUP screen