Chapter 4 Operation Method
81
4. During the recording is stopped, tap the [RECORD STOP/START] button in the SAVE screen.
The RECORD START screen is displayed.
5. Enter the password and tap the [Enter] button. The data recording is restarted.
[Information]
The factory default password is “0000”. Manage the password by the ship administrator.
About how to enter a number, see “4.1.5 Number input”.
[NOTE]
If the data recording is restarted, the alert disappears.
Figure 4-77 Restart data recording
Completion message
Figure 4-76 RECORD START screen
SAVE screen
RECORD START screen
To Next Page
Loading...
