Chapter 4 Operation Method
80
3. Enter the password and tap the [Enter] button. The data recording is stopped, and the
successful completion message is displayed.
[Information]
The factory default password is “0000”. Manage the password by the ship administrator.
About how to enter a number, see “4.1.5 Number input”.
[NOTE]
When the data recording is stopped, the alert occurs.
[Information]
If the password is incorrect, the error message is displayed. Enter the password again.
Figure 4-75 Incorrect password error
Error message
Figure 4-74 Alert: Recording stop
Figure 4-73 Stop data recording
Completion message
To Next Page
Loading...
