3. Installation 7
3. Installation
When installing the equipment, securely connect the earth lead to the earth terminal.
Failure to connect the earth may result in electric shock in the event of a fault or
power leak developing.
Do not install or operate the equipment where subject to temperatures 55°C or higher
or -15°C or lower.
Failure to observe this caution may result in fire or damage.
Do not install the equipment on unstable or unlevel surfaces. Failure to observe this
condition may result in the equipment falling or toppling over, resulting in injury.
Take care when laying the transducer cable, power cable, and earth lead as
positioning has an affect on electromagnetic interference. There is a risk of interfering
with other equipment or the echo-sounder being interfered with by the other
equipment.
After installing the echo-sounder, turn on the power to all other equipment to check for
interference with or from all the equipment. Interference may cause malfunctions.
CAUTION
To Next Page
Loading...
Need help?
General
